Silenced systems
Silenced systems GS
FEATURES
- Soundproofed compressor compartment.
- Crankcase heater on compressor.
- 6-pole condenser motor fan.
- Electronic control unit.
- Expansion type with thermostatic valve.
- Liquid receiver confirms to the 2014/68/EU “Pressure Equipment” Directive.
- Liquid line consisting of tap on the receiver, filter and liquid indicator.
- All units are equipped with low and high pressure switches with fixed calibration, in accordance with the Pressure Equipment Directive 2014/68/EU.
- Solenoid valve on the liquid line.
- Piping connections between the condensing unit and evaporator are made without solder taps or flanges.
- Provision for connection of cell light and door micro.
- Cable for connecting the door heater in low-temperature units.
- Direct condensate water discharge.
- Resistance in the condensate drain.
- Installation of ‘condensing unit on the floor outside the cell, installation of ‘evaporator on the ceiling inside the cell.
- Unit supplied with remote control panel with cable length of 5 m (can be supplied with different lengths up to 20 m on request).
- Condensing unit suitable for outdoor installation. We recommend using the unit in environments with temperatures above 10°C. When installing in environments with temperatures below 10°C, the ‘use of optional accessories is required.
| TN | TB | |
|---|---|---|
| Temperatura cella | +5/-5 °C | -18/-25 °C |
| Potenza frigorifera | 1000 / 9663 W | 823 / 5390 W |
| Volume cella | 8,53 / 257,74 m³ | 5,29 / 84,18 m³ |
MODEL VARIANTS
PRODUCT INFORMATION
Technical Data
Description
Accessories
Technical Data
Cell temperature
TN +5/-5 °C TB -18/-25 °C
TN +5/-5 °C TB -18/-25 °C
Outdoor temperature
+32 / +38 °
+32 / +38 °
Cell volume
5 / 250 m³
5 / 250 m³
Cooling capacity
800 / 9500 W
800 / 9500 W
Gas
R404A
R404A
Gas
R452A
R452A
Average temperature
+5° ÷ -5°
+5° ÷ -5°
Low temperature
-18° ÷ -25° C
-18° ÷ -25° C
Description
- Soundproofed compressor compartment.
- Crankcase heater on compressor.
- 6-pole condenser motor fan.
- Electronic control unit.
- Expansion type with thermostatic valve.
- Liquid receiver confirms to the 2014/68/EU “Pressure Equipment” Directive.
- Liquid line consisting of tap on the receiver, filter and liquid indicator.
- All units are equipped with low and high pressure switches with fixed calibration, in accordance with the Pressure Equipment Directive 2014/68/EU.
- Solenoid valve on the liquid line.
- Piping connections between the condensing unit and evaporator are made without solder taps or flanges.
- Provision for connection of cell light and door micro.
- Cable for connecting the door heater in low-temperature units.
- Direct condensate water discharge.
- Resistance in the condensate drain.
- Installation of ‘condensing unit on the floor outside the cell, installation of ‘evaporator on the ceiling inside the cell.
- Unit supplied with remote control panel with cable length of 5 m (can be supplied with different lengths up to 20 m on request).
- Condensing unit suitable for outdoor installation. We recommend using the unit in environments with temperatures above 10°C. When installing in environments with temperatures below 10°C, the ‘use of optional accessories is required.
Accessories
https://technob.it/wp-content/uploads/2023/04/riscaldatore.png
https://technob.it/wp-content/uploads/2023/04/pressostato_controllo_ventole.png
https://technob.it/wp-content/uploads/2023/04/regolatore_velocita.png
https://technob.it/wp-content/uploads/2023/04/tensione_diversa.png
https://technob.it/wp-content/uploads/2023/04/condensazione_acqua.png
https://technob.it/wp-content/uploads/2023/04/monitor_tensione.png
https://technob.it/wp-content/uploads/2023/04/raccordi_gs.png
- Soundproofed compressor compartment.
- Crankcase heater on compressor.
- 6-pole condenser motor fan.
- Electronic control unit.
- Expansion type with thermostatic valve.
- Liquid receiver confirms to the 2014/68/EU “Pressure Equipment” Directive.
- Liquid line consisting of tap on the receiver, filter and liquid indicator.
- All units are equipped with low and high pressure switches with fixed calibration, in accordance with the Pressure Equipment Directive 2014/68/EU.
- Solenoid valve on the liquid line.
- Piping connections between the condensing unit and evaporator are made without solder taps or flanges.
- Provision for connection of cell light and door micro.
- Cable for connecting the door heater in low-temperature units.
- Direct condensate water discharge.
- Resistance in the condensate drain.
- Installation of ‘condensing unit on the floor outside the cell, installation of ‘evaporator on the ceiling inside the cell.
- Unit supplied with remote control panel with cable length of 5 m (can be supplied with different lengths up to 20 m on request).
- Condensing unit suitable for outdoor installation. We recommend using the unit in environments with temperatures above 10°C. When installing in environments with temperatures below 10°C, the ‘use of optional accessories is required.